Product ID:TIN/LEAD/ANTIMONY ALLOY: WW-300 CORE
MSDS Date:08/01/1992
FSC:3439
NIIN:00-882-7106
MSDS Number: BPZSQ

GARDINER SOLDER CO; DIV OF GARDINER METAL CO

4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: 312-847-0100 OR 800-424-9300

Info Phone: 312-847-0100

Cage: 56244

GARDINER SOLDER CO, DIV OF GARDINER METAL CO

CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

LEAD (SARA III)

CAS: 7439-92-1

RTECS: OF7525000

Fraction By Weight: 5-94.3%

OSHA PEL 0.05 MG/M3;1910.1025

ACGIH TLV: 0.15 MG/M3;DUST 9293

EPA Report Quantity: 1 LB

DOT Report Quantity: 1 LB

ANTIMONY (SARA III)

CAS: 7440-36-0

RTECS: CC4025000

Fraction By Weight: 0.2-2.2%

OSHA PEL 0.5 MG/M3

ACGIH TLV: 0.5 MG SB/M3; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

TIN

CAS: 7440-31-5

RTECS: XP7320000

Fraction By Weight: 5-94.3%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3; 9293

ROSIN ACID

CAS: 8050-09-7

Fraction By Weight: 0.5-3%

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Health Hazards Acute and Chronic:ACUTE & CHRONIC:INHALATION OF DUST MAY
CAUSE IRRITATION.HEALTH STUDIES HAVE SHOWN THAT POTENTIAL HEALTH
RISKS MAY VARY BY INDIVIDUAL.ALWAYS MINIMIZE EXPOSURE AS A
PRECAUTION.
Explanation of Carcinogenicity:IARC MONOGRAPH CONCLUDED THAT LEAD IS
POSSIBLY CARCINOGENIC.
Effects of Overexposure:METALLIC TASTE IN THE MOUTH. IRRITATION OF THE
RESPIRATORY TRACT.
Medical Cond Aggravated by Exposure:RESPIRATORY/LUNG CONDITIONS

First Aid:SEEK MEDICAL ATTENTION IN ALL CASES. EYES: FLUSH WITH WATER
FOR 15 MINUTES. SKIN: FLUSH WITH WATER IMMEDIATELY. TREAT FOR
BURNS. INHALATION: REMOVE TO FRESH AIR. SUPPORT RESPIRATION IF
REQUIRED. INGES TION: DRINK LARGE AMOUNT OF WATER. NEVER GIVE
LIQUIDS TO AN UNCONSCIOUS PERSON.

Flash Point:NON FLAMMABLE
Extinguishing Media:DRY CHEMICAL. DO NOT USE WATER.
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS ABOVE
886C (1627F).
Unusual Fire/Explosion Hazard:INCOMPLETE THERMAL DEGRADATION OF RESINS
ARE KNOWN TO GIVE OFF SMALL AMOUNTS OF FORMALDEHYDE. OSHA AND ACGIH
TWA=100 PPM.

Spill Release Procedures:COLLECT AND USE. IF CONTAMINATED OR IN SMALL
PARTICLES, VACUUM OR COLLECT MATERIAL. NEVER USE METHODS WHICH
GENERATE DUST.

Handling and Storage Precautions:STORAGE-STORE AWAY FROM OXIDIZING
MATERIALS.
Other Precautions:AVOID CONTACT WITH FUMES AND DUST.

Respiratory Protection:ABOVE TLV, NIOSH APPROVED RESPIRATORS - SEE 29
CFR 1910.134. 0.03MG/M3-HALF MASK; 2.5MG/M3-FULL MASK;
50MG/M3-SELF-SUSTAINED RESPIRATORY SUIT.
Ventilation:LOCAL EXHAUST PREFERRED. SPECIAL HEPA FILTERS REQUIRED.
MECHANICAL IS OK.
Protective Gloves:HEAT RESISTANT DURING SOLDERING
Eye Protection:GOGGLES/FACE SHIELD DURING SOLDERING
Other Protective Equipment:AS REQUIRED TO AVOID CONTACT.
Work Hygienic Practices:WASH AFTER USE. FOLLOW GOOD INDUSTRIAL HYGIENIC
PRACTICE.
Supplemental Safety and Health
NONE

HCC:N1
Boiling Pt:B.P. Text:2516F,1380C
Melt/Freeze Pt:M.P/F.P Text:361F,183C
Vapor Pres:1 @ 1626F
Solubility in Water:INSOLUBLE
Appearance and Odor:SILVER GREY SOLID, ODORLESS

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIALS
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:TOXIC METAL FUMES ABOVE 886 C (1627
F).

Waste Disposal Methods:NEVER DISPOSE OF IN TRASH. HOLD FOR RECYCLING OR
DISPOSE OF IN ACCORDANCE WITH ALL FEDERAL, STATE & LOCAL
REGULATIONS

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.